Tascam PORTASTUDIO 788 Bedienungsanleitung PDF herunterladen (Seite 29)

TASCAM 788 Operational Tutorial • 8/2000 Edition Troubleshooting

Section VII

Trouble-Shooting

Next, check the

screen. To get to it, press

MENU, select ,

and choose .

Under the tab, make

sure the is set either to

or . ( is if you

are triggering an external sound module for metronome

tones. is if you are using the internally generated

clicks.)

The parameter in this screen will select whether

the metronome will sound when the 788 is in record and

play, or only in record. ( means record only, and

means record and play.) If is set to ,

then the metronome will not sound when the system is

playing. Switch to if you always want to hear

the metronome.

If you are using the 788’s internal clicks, make sure

the is raised up loud enough. (It should

be reasonably audible at 100.) Also, make sure you

are listening to the audio coming out from either the

PHONES, or from the MONITOR OUTPUT. The signal

is not routed to the STEREO OUTPUT.

If you are using the 788 to

generate MIDI tones for an

external MIDI sound module,

check the tab of the

menu. Make

sure the MIDI channel in the

788 is set to the same MIDI

channel of your synth module, and that the note

numbers and velocities the 788 is sending will be a

valid value for the module.

Lastly, check to make sure the audio connections from

the MIDI module to your monitor system are properly

routed, and that the volume is up for each stage of

that signal routing.

I’m moving the faders, but it’s not affecting the

level of the sound.

Move the fader all the way up, and all the way down.

If the level is now properly processing, then you have

fader matching set to .

If you recall a mixer scene, or control the fader levels

through MIDI controller messages, the physical fader

position may not represent the level the actual processed

fader position. The fader matching parameter

determines the relationship between the physical fader

I’m changing the EQ on the 788, and I’m not

hearing the changes I’m making.

You’re probably either adjusting the EQ on the wrong

channel, the EQ is switched off for that channel, or

you’re changing FREQ or Q without any gain on that

band.

The channel number is

indicated in two places.

The channel you are

affecting will have its

SELECT light on. Also,

the channel number is

indicated in the EQ

screen, just above the

L/R meters in the right

side of the screen. If

the channel number

shown by these

indicators is not the channel you want to affect,

press SELECT for the channel you want to affect.

To make sure the channel EQ is turned on, find the

little box in the upper left corner of the EQ screen

that is labeled . The button underneath it should

show . If it is blank, the EQ is bypassed. To turn

the EQ back on, move the cursor to the box,

and turn the JOG/DATA wheel.

Lastly, check the parameter you are changing. If

you are changing a parameter in the FREQ or Q

rows and the GAIN for that column is set to 0, then

you are adjusting the parameters of a totally flat

curve. Add some gain, and you’ll start to hear the

difference.

I can’t hear the 788’s metronome.

There are a couple of settings that affect the

metronome:

First, check to make sure that the 788 is set to

generate MIDI Clock. The metronome timing is

generated from the

MIDI Clock logic, and

will not work in any

other setting. To check

this, press MENU, select

, then select

. The

should be set to , and

the should be

set to .

EQ bands are arranged vertically,

with matching parameters aligning

horizontally. Use the arrow keys

to move between the parameters.

IN/OUT

control

PAD/GAIN

setting

Channel

indication

The SYNC screen should be

set to generate MIDI Clock.

The metronome will not do

anything if the SYNC SRC is

not set to CLOCK.

1 2 ... 24 25 26 27 28 29 30 31 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Tascam PORTASTUDIO 788 Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikausrüstung Tascam PORTASTUDIO 788