Tascam PORTASTUDIO 788 Bedienungsanleitung PDF herunterladen (Seite 19)

TASCAM 788 Operational Tutorial • 8/2000 Edition Recording & Editing Functions

Section IIIRecording & Editing Functions (Continued)

The PITCH/SSA LED (just above the PITCH/SSA button)

will remain illuminated whenever one of those two

functions is engaged. The function can be turned on

and off simply by pressing the PITCH/SSA button. You

only need to press and hold the PITCH/SSA button to

get to the screen when you want to change functions or

alter how much the speed should vary.

FORMATTING DRIVES

The 788 can record on its internal hard drive, or an

external hard drive. The size of the recording space

cannot exceed 4GB (4 gigabytes). If you are using

drives larger than 4GB, you can break the drive into a

series of 4GB or smaller "partitions". These partitions

will show up as separate recording areas on the 788.

In order to format a drive,

press MENU, select ,

then choose . The

788 will give you a list of

the attached drives. Select

the drive you want to format

and press ENTER/YES.

Once you've selected a drive to format, the screen will

prompt you for the size of the partition to use. The

parameter determines the size of the disk

partitions. determines the level of drive

formatting to be used. If

is set to , the

788 will only set up the drive

directory. If is

set to , it will perform a

more thorough formatting of

the drive. Press ENTER/YES to

accept the current settings.

NOTE: Formatting a drive erases all the information on

that drive, and this function cannot be undone. Make

sure there is no information you want on there before

formatting the drive for the 788.

TARGETING RECORD DRIVES

The target record drive determines where new songs will

be recorded. So, to start a song on a different partition,

first select the target drive, then use the function

in the menu afterwards. That will establish the song

on the new partition, and enable all recording on that

partition.

If you are simply trying to move the song to another

partition with more free space, use the function in

the menu, then open the song on the other partition.

In order to select a partition

for target recording, press

MENU, select , then

choose . The screen

will show you a list of all

disks and partitions, and will

also display the free space

available on each drive to help you determine the best

partition for the new song. Select the partition you

want to record to, and press ENTER/YES.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Tascam PORTASTUDIO 788 Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikausrüstung Tascam PORTASTUDIO 788