Tascam PORTASTUDIO 788 Bedienungsanleitung Seite 6
- Seite / 33
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
QuickStart - First Session TASCAM 788 Operational Tutorial • 8/2000 Edition
6
Section IQuickStart - First Session (Continued)
As we mentioned at the beginning of this section, this
QuickStart "First Session" only scratches the surface of
the potential of this recorder. There is deeper detail of
the 788 in later sections of this tutorial. Aside from this
tutorial, the 788 manual will go into even deeper detail
on any specific feature. Be sure to at least flip through
the book so you are familiar with what information is
covered and where it is, so that you can quickly find
what you are looking for.
FINAL THOUGHTS
Then raise the TRACK CUE
faders for tracks 7 and 8 only,
and press REC READY on
tracks 7 and 8.
Press PLAY and set your mix
the way you want to hear it,
complete with effects, EQ,
and so forth. The recording levels will appear in the
meter so you can set your recording level as well. Once
you've got everything the way you want it, press PLAY +
RECORD to record the bounce. When you're done,
disarm REC READY for tracks 7 and 8.
You can listen to your bounce by returning to the
beginning of the recording and pressing PLAY. If you're
happy with the bounce, you can resume recording other
tracks. If not, you can go back and give it another pass
until you are happy with the results.
Remember too that you can "punch in" on a bounce,
since it is recording to a track on the 788 itself. So, if
you were almost to the end before you made a bad
fader move, try backing up a little bit and punch in on
the recording, just as you would a vocal or guitar part.
- OPERATIONAL TUTORIAL 1
- Table of Contents 2
- QuickStart - First Session 3
- MIXING TRACKS 4
- BASIC EDITING 5
- FINAL THOUGHTS 6
- Mixer Functions 7
- Section II 10
- Mixer Functions (Continued) 10
- ROUTING & SCENE LIBRARIES 11
- ASSIGN MAP 11
- BOUNCING TRACKS 12
- FADER MATCHING 12
- Section III 13
- LOCATE POINTS 14
- BASIC RECORDER FUNCTIONS 14
- MORE LOCATE RESOLUTION 15
- VIRTUAL TRACKS 16
- PUNCH IN/OUT & AUTO PUNCH 16
- EDITING FUNCTIONS 17
- PITCH CONTROL / SSA 18
- FORMATTING DRIVES 19
- TARGETING RECORD DRIVES 19
- Built-in Effect Processing 20
- CONTROLLING EFFECTS 21
- EFFECT TYPES 21
- FINAL NOTES (EFFECTS) 22
- Assigning Names 23
- (Continued) 24
- MIDI Functions 25
- MIDI TIME CODE (MTC) 26
- BUILT-IN METRONOME 27
- MIDI MACHINE CONTROL (MMC) 27
- MIDI AUTOMATION 28
- Trouble-Shooting 29
- Tips & Tricks 32
Verwandte Produkte und Handbücher für Musikausrüstung Tascam PORTASTUDIO 788
(44 Seiten)Datamax O'Neil Workstation series User Guide manuels
Manuels d'utilisation et guides de l'utilisateur pour Imprimeurs Datamax O'Neil Workstation series User Guide.
Nous fournissons des manuels en pdf 1 Datamax O'Neil Workstation series User Guide à télécharger gratuitement par type de document : Manuel de l'utilisateur
Kommentare zu diesen Handbüchern