Tascam X-48 Bedienungsanleitung PDF herunterladen (Seite 50)

Recorder

• Click on the Sync tab and click the Control Mode submenu. Choose the desired

control mode from the list.

Front Panel Operation

• Press the SYNC button. Press the up/down buttons to select Control Mode and

press CHNG.

• Select a control mode from the list using the up/down buttons and press Enter.

Chase Freewheel

Chase Freewheel dictates how far out of sync the SMPTE timecode can drift before the X-

48 drops out of play or record. The choices are 0, 5, 10, 20, 50 or 100 frames. To change the

setting:

Mouse/Keyboard Operation

• Click the Windows menu and select the Settings window.

• Click on the Sync tab and click the Chase Freewheel submenu. Choose the desired

setting from the list.

Front Panel Operation

• Press the SYNC button. Press the up/down buttons to select Chase Freewheel

and press CHNG.

• Select a value from the list using the up/down buttons and press Enter.

Chase Relock

If the SMPTE drifts outside of the Chase Relock Threshold window (see next section), this

setting tells the X-48 what to do:

• Always tells the transport to shift to the correct timecode value, even if it's in record.

• Only if not recording shifts the transport in play but not in record.

• Never ignores the slight timecode offset.

To change the re-lock setting:

Mouse/Keyboard Operation

• Click the Windows menu and select the Settings window.

• Click on the Sync tab and click the Chase Relock submenu. Choose a setting from

the list.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Keine Kommentare

Tascam X-48 Bedienungsanleitung Seite 50