Tascam QUICK LOGIC MIXER DM-24 Bedienungsanleitung PDF herunterladen

QUICK LOGIC MIXER FOR DM-24

OVERVIEW

This solution is recommended for those times when only VOLUME, PAN and

Program change parameters are needed. The advantage of using this mixer in

place of the template is that the tracks will be part of LOGIC’S MIXER and

therefore will be available on the same screen. If more in depth control is

needed then the DM-24 TEMPLATE would be a better choice.

What this solution will do:

1) SEND/RECEIVE Volume (CC#7)

2) SEND/RECEIVE Pan (CC#10)

3) SEND/RECEIVE SySex (as recorded into Logic Tracks)

4) SEND/RECEIVE DM-24 Track Automation (recorded real-time into Logic

tracks)

What it will NOT do:

1) Send Custom CC#s (other than those RECORDED into Logic’s tracks).

2) Send SySex (other than SySex recorded/dumped into Logic Tracks).

The main difference between this and the DM-24 template is that the template

allows the programming of Custom CC# & SySex commands to faithfully

represent the DM-24 surface. Using a MULTI will allow only the above listed

controls but, will be part of Logic’s MIXER and therefore easier to access and

control for those times when quick adjustments of basic controller are needed

(i.e. Volume, Pan, Prg. Chg). It will not send MUTE info since it uses Logic’s

internal code to mute its own tracks, without sending an equivalent MIDI

controller number. However, it will record MUTE commands FROM the DM-

24 and play them back as recorded making it possible to do automated

mutes.

1 2 3 4 5 6 7

(Hand-drawn Volume envelope) 6

Inhaltsverzeichnis

Seite 1

QUICK LOGIC MIXER FOR DM-24 OVERVIEW This solution is recommended for those times when only VOLUME, PAN and Program change parameters are needed.

Seite 2

CREATING A DM-24 MULTI Open Logic’s ENVIRONMENT and choose NEW>MULTI. You will see that the channels within the newly created MULTI are crossed

Seite 3

Click on channel 1 and activate BANK/PROGRAM change. Do the same for channel two. This will allow you to select SNAPSHOTS and EFX patches from Log

Seite 4

That’s it. Now the DM-24 will control the following: PLAY/STOP/FWD/RWD/RECORD/Track arm. RECORDING DM-24 AUTOMATION INTO LOGIC In the ARRANGE wi

Seite 5

(Recorded Automation DATA for all 16 ch. on one track) If you rewind and press PLAY the DM-24 faders should move as you recorded them. Since now al

Seite 6 - (Hand-drawn Volume envelope)

the fader values as desired with a simple, easy to see and intuitive graphical interface, as illustrated below. DRAWING AUTOMATION An alternative

Seite 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Tascam QUICK LOGIC MIXER DM-24 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Tascam QUICK LOGIC MIXER DM-24 herunter. Tascam QUICK LOGIC MIXER DM-24 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Tascam QUICK LOGIC MIXER DM-24